emmeti ETI 2100, Инструкция по установке и эксплуатации, Страница: 15 / 35

GB
15 14
Panel disassembly of
command (if present)
- Set the system main switch to off.
- Remove the two screws that fix the
blind panel (fig. 20 ref. A) to the
front panel (fig. 18 ref. E).
- Remove the two screws that fix the
control panel (fig. 20 ref. C) to the
front panel (fig. 18 ref. E).
- Remove the electrical panel on the
side of the fan coil unit and then
place it on the opposite side.
20
C D
F
- Disconnect the electrical connection
connectors.
- Remove the wiring inside the ma-
chine and reinsert them from the
opposite side.
- Use the appropriate CCM-DC
wiring for right-hand connections
cod.07524061 for the motor con-
nection, available as an accessory.
- Reverse the mounting positions (fig.
20 ref. C) of the control panel and
remount them in their respective
positions.
- Remove the condensate collection
tray (fig. 20ref. F) and refit it on the
opposite side with the relative fixing
screws (fig. 20 ref. G).
A
A
C
F