emmeti ETI 2100, Инструкция по установке и эксплуатации

Страница: 14 / 35

GB
14
ROTATING THE CONNECTIONS
Pay particular attention to all
steps to rotate the exchanger
connections so as to prevent
water leaks and malfunctions.
The steps described and the rel-
ative images refer to a machine
with connections on the left, which
require the rotation of the connec-
tions on the right side. If you have
a machine with connections on
the right that need to turn to the
left, the sequence is the same, the
18
B
E
D
D
A
B
images just have to be considered
specular.
Connect the motor to the control kits
by using the relevant optional CCM-
DC wiring cod.07524061.
Disassembling the panelling
- Remove the upper grid (fig. 17
ref. E) by unscrewing the two
fixing screws (fig. 17 ref. F).
- Remove the lower front grid (fig.
18 ref. A).
- Unscrew the front panel (fig. 18
ref. E) fixing screws (fig. 18 ref.
B-D) and remove it.
B
A
D
A
B
C
E
F
F
17
- On the left side, lift the lid that
covers the screw, loosen the
screw that secures the left panel,
move it slightly to the left and lift
it.
- On the opposite side, lift the
lid that covers the screw and
unscrew it.
- Move the side panel slightly to
the right and lift it.
A lid
B fixing screws
C left panel
D right panel