emmeti ETI 2100, Инструкция по установке и эксплуатации, Страница: 30 / 35

54
GB
THIN-4-V electric box control panel
Green minimum speed symbol
Green medium speed symbol
Green maximum speed symbol
Green Supersilent mode symbol
Red heating symbol
Blue cooling symbol
Temp + allows you to increase the set temperature
Temp - allows you to decrease the set temperature
Heating/Cooling: allows the operating mode to
be switched between heating and cooling (2
seconds)
Allows you to activate the appliance, select one
of the 4 speeds or set it to stand-by (2 seconds).
A B
A
B
LED indications
The control makes the room temperature adjustment fully autonomous
by setting the adjustable setpoint from 5 to 40°C, one of the 4 speeds
and the summer/winter selection.
Being connected to the water temperature detection probe inside
the coil, it performs the minimum winter temperature (30°C) and
maximum summer temperature (20°C) function.
The control panel is fitted with a memory so all settings will not be lost
if shut-down or in the event of a power failure.
The commands cannot be installed on the ETI version
After a period of 20 seconds from the last action, the brightness of
the panel is specifically reduced to increase the comfort during the
night-time and the display shows the room temperature. Maximum
brightness is reset when any key is pressed.
The various functions are set via 4 keys:
Display
Keys and LEDs
For the fan coil unit to be managed via the control panel, this must be connected to the mains.
If a master switch has been fitted on the power supply line, this must be connected.
- Switch the system on by connecting the master switch
THIN-4-V electric box
The 6 LEDs display the operating statuses:
Key function
General switch-on
ETM-mallin ohjain
ETM-mallin ohjain