manualshive.com logo in svg

Emerson unidrive m200, Справочник по параметрам

Поделиться
Скачать
Emerson unidrive m200 Скачать руководство пользователя страница 249

Trip

C.Err

Value

182

Short description

NV media card data structure error detected

An attempt has been made to access a NV media card, but an error has been detected in the data structure on the card. Resetting this trip will cause the drive to erase the <MCDF>

folder from the NV media card (if it exists) and create the correct folder structure. On an SD card, whilst this trip is still present, missing directories will be created, and if the header

file is missing it will be created. The following sub-trip numbers are used with this trip.

Sub-

trip

Reason

1

The required folder and file structure is not present.

2

The <000> file is corrupted.

3

Two or more files in the <MCDF\> folder have the same file identification

number.

Recommended actions:

Erase all the data block and re-attempt the process.

Ensure the card is located correctly.

Replace the NV media card.

Trip

C.Ful

Value

184

Short description

NV media card is full

An attempt has been made to write to a NV media card, but there is insufficient space available.  No data is transferred.

Recommended actions:

Delete a data block or the entire NV media card to create space.

Replace the NV media card.

Trip

C.OPt

Value

180

Short description

Option difference detected

A parameter file has been transferred from a NV media card to the drive, but the option module fitted is different between source and target drives. This trip does not stop the data

transfer, but is a warning that the data for the option module will be set to the default values and not the values from the card. This trip also applies if a compare is performed between

a parameter file on a card and the drive and the option module fitted is different between the source and target.

Recommended actions:

Ensure the correct option modules are installed.

Press the red reset button to acknowledge that the parameters for the option module installed will be at their default values.

This trip can be suppressed by setting Pr 

mm.000

 to 9666 and resetting the drive.

Trip

C.Pr

Value

175

Short description

Product difference detected

Product or derivative are incompatible between the source and target drives.

Sub-trip

Reason

1

If 

Drive Derivative

 (11.028) is different between the source and target drives. This trip is initiated

either at power-up or when the SDcard is accessed. This trip can be reset and data can be

transferred in either direction between the drive and the card.

2

If 

Product Type

 (11.063)  is different between the source and target drives or the file is corrupted or

incompatible. This trip is initiated either at power-up or when the SDcard is accessed. This trip can

be reset but no data are transferred in either direction between the drive and the card.

3

Reserved

Recommended actions:

Sub-trip

Actions

1

Use a different NV media card or choose a file compatible  between the source and target drives.

This trip can be suppressed by setting Pr 

mm.000

 to 9666 and resetting the drive.

2

Use a different NV media card or choose a file compatible  between the source and target drives.

Trip

C.rdo

Value

181

Short description

Attempt to overwrite protected data detected

An attempt has been made to modify data on a read-only NV media card or to modify a read-only file (i.e. erase the card, erase a file or create a file). No data is transferred.

Recommended actions:

Clear the read only flag by setting Pr 

mm.000

 to 9777 and reset the drive. This will clear the read only flag for all data blocks in the NV media card.

Unidrive M200 Parameter Reference Guide

Issue: 01.05.00.10

249

Содержание unidrive m200
























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды