Emerson Rosemount 1066 Скачать руководство пользователя страница 13

Страница: 13 / 134

Specifications

Instruction Manual

Section 2: Description and Specifications

LIQ-MAN-1066

April 2017

Features and applications

This loop-powered multi-parameter unit serves industrial, commercial and municipal applications

with the widest range of liquid measurement inputs available for a two-wire liquid transmitter.
The 1066 Smart transmitter supports continuous measurement of one liquid analytical input. The

design supports easy internal access and wiring connections.

analytical Inputs:

Ordering options for pH/ORP, Resistivity/Conductivity, % Concentration,

Total Chlorine, Free Chlorine, Monochloramine, Dissolved Oxygen, and Ozone.

large Display:

The high-contrast LCD provides live measurement readouts in large digits and shows

up to four additional variables or diagnostic parameters.

Digital Communications:

HART 7 and FOUNDATION Fieldbus options.

Menus:

Menu screens for calibrating and programming are simple and intuitive. Plain language

prompts and help screens guide the user through the procedures. All menu screens are available in

eight languages. Live process values are displayed during programming and calibration.

Quick Start programming:

Popular Quick Start screens appear the first time the unit is powered. The

instrument prompts the user to configure the sensor loop in a few quick steps for immediate commis-

sioning.

user help Screens:

Fault and warning messages include help screens similar to PlantWeb

™

alerts

that provide useful troubleshooting tips to the user. These on-screen instructions are intuitive and

easy to use.

Diagnostics:

The transmitter continuously monitors itself and the sensor for problems. A display

banner on the screen alerts Technicians to Fault and/or Warning conditions.

languages:

Emerson extends its worldwide reach by offering eight languages – English, French,

German, Italian, Spanish, Portuguese, Chinese and Russian.

Current Outputs:

HART units include two 4-20 mA electrically isolated current outputs giving the

ability to transmit the live measurement value and the process temperature reported from the sen-

sor.

Input Dampening:

is automatically enabled to suppress noisy process readings.

Smart-Enabled ph:

Rosemount SMART pH capability eliminates field calibration of pH probes

through automatic upload of calibration data and history.

automatic Temperature Compensation:

Most measurements require temperature compensa-

tion. The 1066 will automatically recognize Pt100, Pt1000 or 22k NTC RTDs built into the sensor.

Smart Wireless Thum adaptor Compatible:

Enable wireless transmissions of process variables

and diagnostics from hard-to-reach locations.

Section 2: Description and Specifications

2.1

Содержание Rosemount 1066







































































































































Результаты поиска

Содержание Rosemount 1066

Отзывы:

Похожие инструкции для Rosemount 1066

Бренды по названию

Популярные бренды

Emerson Rosemount 1066, Инструкция по эксплуатации

Результаты поиска

Содержание Rosemount 1066

Отзывы:

Похожие инструкции для Rosemount 1066

Бренды по названию

Популярные бренды