Emerson MCi210, Руководство пользователя

Страница: 22 / 78

22
MCi210 User Guide
Issue Number: 2
When this parameter is 0 the module will reset when a drive trip is cleared. When the parameter is
set to On, the module will continue running (i.e. not reset) when a drive trip is cleared.
When this parameter is 0, and an out of range value is written to a parameter, then the value will be
automatically limited to that parameter's maximum or minimum value.
When this parameter is 1, and an out of range value is written to a parameter, then a run-time error
(code 44) will occur.
When set the module will save any retain data that the user has defined, up to a maximum of 2 kB.
When the save is complete, the parameter will be cleared to zero. The save will be processed as a
background task and will not affect any scheduled user tasks.
The parameter allows the user to define the action on the retain data when the drive enters under
voltage state.
When set to 0 no action will be taken and the retain data will not be saved.
When set to 1 the retain data will be automatically saved when the drive enters the under voltage
state.
S.01.015 Disable reset on trip clear
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit User Save Update Rate Background read
Display Format None Decimal Places 0
Coding RW
S.01.017 Enable out of range error
Minimum 0 Maximum 1
Default 0 Units
Type 16 Bit Volatile Update Rate Background read
Display Format None Decimal Places 0
Coding RW
S.01.019 Save retain data request
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate Read every 200 ms
Display Format None Decimal Places 0
Coding RW, NC
S.01.020 Power down retain data save
Minimum 0 Maximum 2
Default 1 Units
Type 8 Bit User Save Update Rate
When Under Voltage is
detected
Display Format None Decimal Places 0
Coding RW, Txt, NC