EMC Connectrix ED-64M, Руководство пользователя

Страница: 96 / 476

4
4-10
Connectrix ED-64M User Guide
Monitoring and Managing the Director
Using Menu Options Right click on various parts of the Hardware view to display pop-up
menu options for displaying status and information and for
controlling the director and its FRUs.
Director Menu Right-click on any area of the director illustration where a hardware
component is not installed to display the following menu options:
◆
Director Propertie s — Displays such information as the director
name, description, location, and contact person. Refer to
Displaying Director Properties on page 4-9.
◆
Enable Unit Beaconing — Click the check box to toggle unit
beaconing on or off. When the box is checked, unit beaconing is
on, and the amber system error light on the front of the actual
director blinks to help users locate the unit in an equipment room.
(The amber indicator on the Hardware view also blinks.)
When you click the check box to remove the checkmark, unit
beaconing is off and the amber LED goes out.
You can enable beaconing only if the system error light is off, meaning
there are no system errors.
◆
Clear System Error Light
— Turns off the amber system error
LED, located below the green power LED on the front of the
director. (This also turns off the amber system error light indicator
in the Hardware view.)
◆
IPL Director — Initiates an IPL on the director. Refer to Executing
an IPL on page 7-6.
CAUTION
!
An IPL is not intended for ordinary or casual use and should
only be performed when directed by your support personnel.
◆
Set Director Date and Time — Sets the date and/or time. You can
also configure the director to synchronize its date and time to the
Connectrix service processor. Refer to Configuring the Date and
Time on page 5-42 for more information.
◆
Set Director Online State — Displays the current state (off line or
on line) and provides a button for changing the state. Refer to
Setting the Online State on page 7-8 for more information.