EMC Connectrix ED-64M, Руководство пользователя

Страница: 289 / 476

A
Fibre Alliance MIB (fcmgmt.mib)
A-73
Using SNMP to Manage the Switch
FcConnUnitLinkPortNumberY Integer32 The attached port
number on the link.
This information is
available only for E
ports from ISR. For
F port, -1 is
returned. R The port number on the unit
specified by
fcConnUnitLinkNodeIdY if known,
otherwise –1. If the value is
non-negative then it will be equal to
fcConnUnitPortPhysicalNumber.
FcConnUnitLinkPortWwnY OCTET STRING The attached port
WWN on the link.
For E ports, returns
the WWN of the
connected switch. R The port WWN on the unit specified
by fcConnUnitLinkNodeIdY if
known, otherwise 16 octets of
binary 0.
FcConnUnitLinkAgentAddressY OCTET STRING
(SIZE(16)) R The address of an FCMGMT MIB
agent for the node identified by
fcConnUnitLinkNodeIdY, if known;
otherwise 16 octets of binary 0.
FcConnUnitLinkAgentAddressTypeY Unsigned32 R If fcConnUnitLinkAgentAddressY is
non-zero, then it is a protocol
address.
FcConnUnitLinkAgentAddressType
Y is the ‘address family number’
assigned by IANA to identify the
address format. (e.g., 1 is Ipv4, 2 is
Ipv6).
FcConnUnitLinkAgentPortY Unsigned32 R The IP port number for the agent.
This is provided in case the agent is
at a non-standard SNMP port.
FcConnUnitLinkUnitTypeY FcUnitType If it’s E port, return
switch (4).
Otherwise return
RNID type Y. R Type of the FC connectivity unit as
defined in fcConnUnitType.
FcConnUnitLinkConnIdY OCTET STRING
(SIZE(3)) For F ports, return
Fibre Channel
Address. For E
ports, return left
adjusted domainId
of the switch. R This is the Fibre Channel ID of this
port. If the connectivity unit is a
switch, this is expected to be a
24-bit Big Endian value. If this is
loop, then it is the ALPA that is
connected. If this is an e-port, then
it will only contain the domain ID. If
not any of those, unknown or
cascaded loop, return all bits set to
1.
Table A-35
Link Table (continued)
FA MIB Object Name Type Product Mapping Access Description