EMC Connectrix ED-64M, Руководство пользователя

Страница: 65 / 476

3
Using the Product Manager
3-5
Product Manager Overview
Using the Product Manager
This section provides a general overview of the Product Manager and
its functions. For details on performing specific tasks and using
specific dialog boxes, refer to the appropriate chapters in this manual.
Using Dialog Boxes Dialog boxes, such as the one in Figure 3-2, display when you select
options from the pop-up menus. To enter data in a dialog box field,
click in the field and begin typing when the insertion point appears.
Figure 3-2 Typical Dialog Box
To enter data into an empty field, click in the field and begin typing
when the cursor appears at insertion point.
To change or remove data that already exists in a field, drag the
cursor (or double-click on the data) to highlight the characters you
want to change/delete; then type in the new data. (It should
overwrite the highlighted characters; if not, use the
DELETE
or
BACKSPACE
key to remove characters.
Clicking one of these buttons in a dialog box initiates the described
function (not all buttons appear in all dialog boxes):
◆
OK — Saves the data you entered and closes the dialog box.
◆
Activate — Saves the data you entered and closes the dialog box,
unless there is a Close button, in which case Activate saves the
information without closing the box.
◆
Close — Closes the dialog box and saves the data you entered.
◆
Cancel — Cancels the operation and closes the dialog box
without saving the information you entered.
Keyboard Navigation Keyboard navigation is an alternative to mouse navigation. Use the
methods described in this section to navigate using your keyboard.