EMC Connectrix ED-64M, Руководство пользователя

Страница: 102 / 476

4
4-16
Connectrix ED-64M User Guide
Monitoring and Managing the Director
Displaying Port
Properties
To display a Port Properties window, double-click the port (or
right-click the port and click Port Properties on the pop-up menu).
The Port Properties parameters are:
◆
Port Number — The physical port number.
◆
Port Name — A user-defined port name or description. Refer to
Configuring Ports on page 5-19 for instructions.
◆
Type :
• G_Port — Appears if nothing is logged into the port.
• F_Port — Appears if a device is logged into the port.
• E_Port — Appears if the port is connected to another
director’s E_Port via an ISL.
◆
Operating Speed — The current data speed for the port:
1 Gb/sec , 2 Gb/sec, or Not Established. Not Established appears
if Negotiate was set for the port through the Configure Ports
Off Off Yellow triangle Off line The director port was configured as Unblocked and is receiving the
Fibre Channel OLS, indicating that the attached device is off line.
Link incident A link incident occurred on the port. The status symbol appears in
the Port List view, port card view, and Hardware view.
Link reset The director and the attached device are performing a link reset
operation to recover the link connection. Ordinarily, this is a
transient state that should not persist.
Not
operational The director port is receiving the Fibre Channel not operational
sequence (NOS), indicating that the attached device is not
operational.
Inactive The switch port is in an inactive state. Reasons for this state appear
in the Reason field of the Port Properties window.
Note that if port optics have also failed, the amber LED will be on.
Not installed The port optics are not installed or the feature that provides
additional port function is not enabled.
Table 4-3
Port States (continued)
Port Indicators
Status Symbol Port State Description Green Amber