EMC Connectrix ED-64M, Руководство пользователя

Страница: 281 / 476

A
Fibre Alliance MIB (fcmgmt.mib)
A-65
Using SNMP to Manage the Switch
FcConnUnitPortControl INTEGER ResetConnUnitPort(3),
offlineConnUnitPort(6),
onlineConnUnitPort(7),
and portFailure(42501)
are the only
set-operations are
supported. Always
return unknown(1) on
read. R/W This object is used to control the
addressed fcConnUnit’s port. Valid
commands are:
Unknown (1) and invalid (2) are
only used as values that are read.
ResetConnUnitPort (3): If the
addressed connectivity unit allows
this operation to be performed on
this port, the addressed port
performs a vendor-specific ‘reset’
operation. Examples of these
operations are: the Link Reset
protocol, the Loop Initialization
protocol, or a resynchronization
occurring between the transceiver
in the addressed port to the
transceiver that the port is
connected to.
BypassConnUnitPort (4): If the
addressed connectivity unit allows
this operation to be performed to
this port, the addressed port
performs a vendor-specific ‘bypass’
operation. Examples of these
operations are: transitioning from
online to offline, a request
(NON-PARTICIPATING) command
to the Loop Port state machine, or
removal of the port from an
arbitrated loop by a hub.
UnbypassConnUnitPort (5): If the
addressed connectivity unit allows
this operation to be performed to
this port, the addressed port
performs a vendor-specific
‘unbypass’ operation. Examples of
these operations are: the Link
Failure protocol, a request
(PARTICIPATING) command to the
Loop Port state machine, or
addition of the port to an arbitrated
loop by a hub.
Table A-33
Port Table (continued)
FA MIB Object Name Type Product Mapping Access Description