EMC Connectrix EC-1100 System, Руководство пользователя

Страница: 61 / 216

2
Managing Remote Access to the Service Processor
2-29
Connectrix Manager Administration
The Session View displays active session information by displaying
the user name logged into the remote workstation, the workstation’s
network address or DNS name, and the time that the session was
established.
Modifying Session
Parameters
Allow access to the Connectrix service processor from all
workstations or only from specific remote workstations through the
Session Options
dialog box. To display and use this dialog box,
follow these steps.
1. Move your cursor over the Configure icon in the navigation
control panel and select Session Options from the pop-up menu.
This displays the following dialog box:
Figure 2-14
Session Options Dialog Box
2. Enter information into this dialog box as follows:
a. Check the Allow remote management sessions check box (a
checkmark appears) to allow remote access from remote
workstations. If you do not check this box, remote access is
blocked even if you provide access information in other parts
of this dialog box.
Use this check box as a method to quickly disallow remote
access while saving the current access administration in this
dialog box.
b. Click the arrow beside the Maximum number of remote
management sessions list box to display up to four sessions.
Click a number to select it. This limits the number of
simultaneous sessions between workstations and the
Connectrix service processor.