42
Rolled Hemming
Picot Edging
Narrow Hemming
Lower looper
pre-tension setting
slider
TIGHT
* Set the lower looper
pre-tension setting slider to
TIGHT after threading.
TIGHT
* Set the lower looper
pre-tension setting slider to
TIGHT after threading.
STD.
Standard setting of
tension dials
Right
needle
Upper
looper
Lower
looper
Right
needle
Upper
looper
Lower
looper
Right
needle
Upper
looper
Lower
looper
(Synthetic)
3-4
(Synthetic)
3
(Synthetic)
3
(Synthetic)
2-4
(Synthetic)
3
(Synthetic)
3
(Synthetic)
4
(Synthetic)
3
(Synthetic)
3
(Synthetic)
4
(Wooly
nylon)
1
(Synthetic)
3
-
-
-
(Synthetic)
4
(Wooly
nylon)
1
(Synthetic)
3
(Synthetic)
4
(Wooly
nylon)
1
(Wooly
nylon)
3
(Synthetic)
4
(Wooly
nylon)
1
(Wooly
nylon)
3
Stitch length dial
R
3-4
R
Differential feed
dial
1.0
1.0
1.0
Chaining finger
switch knob
R
R
R
Upper knife
Activated
Needle
Using the right needle: HA-1 SP No. 11
(Remove the left needle.)
Needle thread
Synthetic: No. 80 - 100
Fabric
Lightweight fabric such as organdy, crepe de chine, lawn and georgette
ROLLED HEMMING, PICOT EDGING AND NARROW HEMMING
Tension Dial and Machine Settings According to the Thread and Fabric
The setting of tension dials may vary depending on the
type and thickness of fabric and thread being sewn.
* Refer to page 10 for details on how to remove the needle.
* Refer to page 11 for details on how to adjust the stitch length.
* Refer to page 11 for details on how to adjust the difference ratio.
* Refer to page 13 for details on how to adjust the chaining finger switch knob.
* Refer to page 12 for details on how to deactivate and activate the upper knife.
CAUTION
Make sure to turn the power switch off before
changing the needle or setting the chaining finger
switch knob.
ROL PORUB, PIKOT IVICA I USKI ŠAV
Podešavanje zategnutosti i mašine
zavisno od tkanine i konca
Podešavanje zategnutosti konca može se razlikovati
u zavisnosti od vrste tkanine i konca koje koristite.
PAŽNJA
Isključite glavni prekidač na mašini pre nego što
menjate iglu ili podešavanje lančanog prsta.
Rol porub
Pikot ivica
Uski šav
Klizač za
predzategnutost
donjeg petljača
Postavite klizač predzategnutosti
donjeg petljača na TIGHT nakon
što provučete konac
Postavite klizač predzategnutosti
donjeg petljača na TIGHT nakon
što provučete konac
Uobičajena
podešavanja
zategnutosti
konca
Desna
igla
Gornji
petljač
Donji
petljač
Desna
igla
Desna
igla
Gornji
petljač
Donji
petljač
Gornji
petljač
petljač
Donji
(Sintetički)
(Vuneni
najlon)
(Sintetički) (Sintetički) (Sintetički) (Sintetički) (Sintetički) (Sintetički) (Sintetički) (Sintetički)
(Sintetički)
(Sintetički)
(Sintetički)
(Sintetički)
(Sintetički)
(Sintetički)
(Vuneni
(Vuneni
(Vuneni
(Vuneni
najlon)
najlon)
najlon)
najlon)
(Vuneni
najlon)
Dužina boda
Diferencijalni
odnos
Taster lančanog
prsta
Gornji nož
Aktiviran
Igla
Igleni konac
Tkanina
Koristite desnu iglu : HA-1 SP No. 11
(Uklonite levu iglu)
Sintetički: No. 80-100
Lagane tkanine kao što su organdin, krep de šin, žoržet...
Pogledajte stranu 10 za uklanjanje igle.
Pogledajte stranu 11 za podešavanje dužine boda.
Pogledajte stranu 11 za podešavanje diferencijalnog odnosa.
Pogledajte stranu 13 za podešavanje tastera lančanog prsta
Pogledajte stranu 12 za aktiviranje i deaktiviranje gornjeg noža.
Содержание eXtend 864air
