7
GETTING READY TO SEW
WARNING
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, handwheel, knives,
loopers or needles.
Always turn off the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control.
Turn the power switch off.
Insert the machine plug into the machine socket.
Insert the power supply plug into the wall outlet.
Turn the power switch on.
q
Power switch
w
Machine plug
e
Machine socket
r
Power supply plug
t
Wall outlet
y
Foot control
Before Using Your Machine
Before using your machine for the first time, place
a scrap of fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away any
oil which may appear.
Operating Instructions:
The symbol “O” on the switch indicates the “off” position
of the switch.
Foot control model YC-482-J-1 (U.S.A and Canada only)
is used with this machine.
For the U.S.A. and Canada only:
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If
it still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
Controlling Sewing Speed
Depress the foot control to start the machine.
The further down you press on the foot control, the faster
the machine runs.
q
Foot control
w
e
q
r
t
y
q
NOTE:
A presentation video with quick-start information is
available for this model and can be downloaded from
our website at www.elna.com/support
Connecting the Power Supply
PRIPREMA ZA ŠIVENJE
NAPOMENA:
Prezentacioni video sa informacijama za brzi po
č
etak
je dostupan i možete ga preuzeti sa našeg vebsajta
www.elna.com/support
Povezivanje na napajanje
UPOZORENJE
Tokom upotrebe uvek držite pogled na podru
č
ju šivenja,
i nemojte dirati bilo koji pokretni deo kao što su
poluga podiza
č
a konca, zamajac, noževi, petlja
č
i ili
igle.
Uvek isklju
č
ite prekida
č
napajanja i uti
č
nicu kada:
- ostavljate mašinu bez nadzora
- postavljate ili uklanjate delove
-
č
istite mašinu
Nemojte stavljati ništa na papu
č
icu.
Isklju
č
ite glavni prekida
č
.
Stavite uika
č
za mašinu u uti
č
nicu na mašini.
Ubacite utika
č
za napajanje u uti
č
nicu na zidu.
Uklju
č
ite glavni prekida
č
.
Glavni prekida
č
Utika
č
za mašinu
Utika
č
na mašini
Utika
č
za napajanje
Utika
č
na zidu
Papu
č
ica
Pre koriš
ć
enja mašine
Pre prvog koriš
ć
enja mašine, postavite par
č
e tkanine ispod
stopice i pustite mašinu da radi bez konaca nekoliko minuta.
Obrišite krpom bilo koji trag ulja koji se može pojaviti.
Instrukcije za upotrebu:
Simbol "O" na glavnom prekida
č
u pokazuje da je isklju
č
en.
Kontrolisanje brzine šivenja
Pritisnite papu
č
icu da pokrenete mašinu.
Ja
č
im pritiskom papu
č
ice, pove
ć
ava se brzina šivenja.
Papu
č
ica
Содержание eXtend 864air
