47
Gathering
Sew and check the thread tensions.
If the tension balance on the test piece is not satisfactory,
you can adjust the thread tension with the thread tension
dial.
* Adjust the differential feed dial between 1.0 and 2.0 for
gathering.
q
Left needle thread tension dial
w
Right needle thread tension dial
e
Upper looper thread tension dial
r
Lower looper thread tension dial
t
Chaining finger switch knob
y
Upper knife release knob
u
Stitch length dial
i
Differential feed dial
o
Lower looper pre-tension setting slider
* Refer to page 10 for details on how to remove the
needle.
* Refer to page 11 for details on how to adjust the
stitch length.
* Refer to page 11 for details on how to adjust the
difference ratio.
* Refer to page 12 for details on how to deactivate/
activate the upper knife.
* Refer to page 13 for details on how to adjust the
chaining finger switch knob.
CAUTION
Make sure to turn the power switch off before
changing the needle, deactivating/activating the upper
knife or setting the chaining finger switch knob.
w
q
e
r
t
y
u
i
o
Machine Setting
Lower looper
pre-tension
setting slider
STD.
Standard setting
of tension dials
Left
needle
Right
needle
Upper
looper
Lower
looper
3
3
3
3
Stitch length dial
3-4
Differential feed
dial
2.0
Chaining finger
switch knob
S
Upper knife
Activated
Needle
Use both the right and left needles:
HA-1 SP No. 14 or No. 11
Needle thread
Synthetic: No. 60 - 80
Upper looper
thread
Synthetic: No. 60 - 100
Lower looper
thread
Synthetic: No. 60 - 100
Fabric
Medium weight, light weight
Nabori
Uradite probno šivenje i proverite zategnutost konca.
Ako zategnutost konca na probnoj tkanini nije
ispravna, podesite je.
Za nabore podesite odnos diferencijala između
1.0 i 2.0
PAŽNJA
Isključite glavni prekidač mašine pre početka zamene
igle, aktivacije/deaktivacije gornjeg noža ili pomeranja
tastera lančanog prsta.
Točkić za zategnutost konca leve igle
Točkić za zategnutost konca desne igle
Točkić za zategnutost konca gornjeg petljača
Točkić za zategnutost konca donjeg petljača
Taster lančanog prsta
Točak za aktivaciju/deaktivaciju gornjeg noža
Točak za podešavanje dužine boda
Točak za podešavanje odnosa diferencijala
Klizač za predzategnutost konca donjeg petljača
Pogledajte stranu 10 za detalje kako da zamenite
igle
Pogledajte stranu 11 za detalje kako da podesite
dužinu boda
Pogledajte stranu 11 za detalje kako da podesite
diferencijalni odnos
Pogledajte stranu 12 za detalje kako da aktivirate/
deaktivirate gornji nož
Pogledajte stranu 13 za detalje kako da podesite
taster lančanog prsta.
Podešavanja mašine
Klizač za
predzategnutost
donjeg petljača
Uobičajena
zategnutost
konca
Dužina boda
Diferencijalni
odnos
Taster lančanog
prsta
Gornji nož
Igla
Igleni konac
Konac gornjeg
Konac donjeg
petljača
petljača
Tkanina
Leva
igla
igla
Desna
petljač
petljač
Gornji
Donji
Aktiviran
Koristite i desnu i levu iglu:
HA-1 SP No. 14 ili No. 11
Sintetički: No. 60 - 80
Sintetički: No. 60 - 100
Sintetički: No. 60 - 100
Srednje debele, lagane
Содержание eXtend 864air
