Elite Greenhouses KENSINGTON 10 x 6, Руководство пользователя

Страница: 28 / 40

FITTING THE DOOR
a. Hold the door frame assembly in front of the door opening, to the left of your right hand gable is
the door end, to the right if your left hand gable is the door end.
b. Align the door wheels with the guides in the upper track.
c. Set the first door wheel into the track with the bottom of the door inside the cill section.
d. Slowly push the door towards the wall bar, making sure the nylon door skid remains in the bot-
tom cill guide.
e. Continue moving the door towards the wall making sure the second wheel correctly enters the
top door track. When the black rubber door stop butts up to the glazing bar, carefully ease the door
past the bar by moving it inwards to allow the door to move past.
f. Make sure the nylon guide remains in the door guide at the bottom.
g. The door can now be adjusted slightly up or down to afford proper unhindered movement by
loosening the bolts, holding the door track support and moving it up and down.
h. Bolt a small angle bracket to the upright corner bar at the top and to the end of the upper door
track to support the door track when opening and closing the door.
INSTALLATION OF SINGLE FRONT DOOR
1.Firstly you must decide which bay the door opening is to be. N.B. This door position cannot be
on either outer bays.
2. Having decided where the door is positioned, install the door track support at the door opening
bay utilising the unoccupied bolts in the glazing bars. Fit the door track support approximately 1”
below the gutter.
3. Attach the door track in the same way as outlined in the door end section of this booklet.
4. Slacken off the nuts on the door track support and move the door track and gutter approximately
2” from the end of the door track.