Elite Greenhouses KENSINGTON 10 x 6, Руководство пользователя

Страница: 22 / 40

GENERAL ASSEMBLY OF GREENHOUSE UNIT
A Attach right and left hand gables to front frame
1.Stand the right hand end frame and the front up so that they meet at the right front corner. Push
the gutter/eave bar into the small gap between the roof and side corner bars so that the slotted holes
at the end of the eave flanges line up with the bolt slot in the corner bar. The gutter is OUTSIDE
the end frame and the two flanges that form the angle of the roof and side are INSIDE and tight up
against the bolt slots of the roof and side corner bars
(Key point)
.
The extra bolts inserted into the corner bar during gable end assembly can now be slid into the slots
in the eave bar to secure the corner.
2. The bottom cill attaches to the inside of the corner bar. The bolt placed in the bolt slot at ga-
ble end assembly (see page 11) will slide down into the slotted hole at the end of the cill.
3. Do the same operation with the left hand gable and front frame.
4. Next, attach the horizontal front angle and two diagonal angles to the extra, third bolt inserted in
the side corner bars.