EM-2115 4.0 SERVICE, MAINTENANCE, CALIBRATION
(EM2115S4-5)
b.
Remove the eight screws that secure the top brace to the four submodule assem-
blies.
c.
Remove the interconnection subminiature coaxial cables between the individual
submodules.
d.
To assemble a Submodule Assembly, reverse the above procedure except for the
following:
1)
Do not tighten the screws securing the brace to the individual submodules until
the entire assembly has been installed within the receiver.
4.2.4 Front Panel Assembly (A1) Removal
a.
Remove the top and bottom covers.
b.
Remove the four (two top corner, two bottom corner) flat head screws (4-40 x
3/16) that secure the Front Panel Assembly into the receiver.
c.
Remove the rigid coaxial cable from the front panel Low Pass Filter Assembly.
d.
Carefully pull the Front Panel out and away from the receiver until the cable plugs
and connectors can be easily reached.
e.
Remove the following cables and connectors.
1)
P1 from A1A3J1.
2)
P4 from A1A3J4.
3)
P6 from J6 (Plug/Connector are loose near the front bulkhead and A7 Card
Rack Assembly).
4)
P2 from A7J2.
5)
P3 from A7J4.
6)
P4 from A7J4.
7)
P5 from A7J5.
8)
P9 from A1A3J9
9)
A1A3J5 (flexible coaxial cable) from Microprocessor Board.
Содержание EM-2115
