ATTENTION
!
If the image from the picture above is missing in the middle of the screen, we
recommend restarting the thermal regulator by turning off the boiler power supply and then
turning it on again!
INFORMATION SCREENS
Hourly statistics -
Pressing the
Enter
button when the thermoregulator is in the "
Main screen
",
switches to viewing additional information screens. The graphs for the electrical energy consumed by
the electric heater are displayed first. Then are the graphs of the energy consumed by the outdoor
unit of the heat pump. Then there are the graphs of the operation of the solar pump and finally the
graphs with the average water temperature at the top of the boiler. The first three types of graphics
are for the last 4 days and the average temperature graphs are for the last 2 days. These charts are
scrolled with the up and down arrows. The output is done with a histogram on the entire display. The
co-ordinate system has a horizontal axis with the hours of the day and a vertical axis with the energy
consumed in kWh or with the total working time in minutes of the circulation pump. On the top, the
date to which the information refers is displayed and the field at the bottom of the display contains a
summary of the day. The average temperature chart is with interval every half hour.
Information -
Pressing the
Enter
button after the status "Hourly Statistics" switches to the screen
“
Information”
20
