3 | Advanced Adjustments/Settings
32
Menu Rotation
Settings: "0°" / "90°"
When the monitor is used in a portrait position, the direction of the Setting menu can also be
changed.
Note
• Check whether the cables are connected properly.
• It is necessary to configure the settings of the external device to use the monitor in a portrait
position. For details, refer to our web site (
).
Power Save
Settings: "On" / "Off"
This function allows you to set the monitor to the power saving mode, depending on the
state of the external device connected to it.
The monitor changes to power saving mode about 15 seconds after signal input ceases to
be detected. When the monitor has shifted to power saving mode, images are not displayed
on the screen.
• Exiting power saving mode
– The monitor receives input.
Note
• At the time of shifting to power saving mode, a message that indicates the transition is displayed
five seconds in advance.
• When not using the monitor, you can turn off the main power supply or disconnect the power
plug so that the power is cut completely.
• Even if the monitor shifts to power saving mode, devices connected to the USB downstream port
will still work. In addition, power is supplied to devices connected to the USB-C connector.
Therefore, power consumption of the monitor varies depending on the connected devices, even
in power saving mode.
Indicator
Settings: "Off" / "1" – "7"
The brightness of the power button and the control buttons when the screen is displayed
can be set. (Default setting: 4)
Beep
Settings: "On" / "Off"
The sound played when switches are used can be set.
Input Skip
Settings: "Skip" / "-"
This function allows skipping of input signals that will not be used when the input signals are
switched.
Note
• Not all input signals can be set to "Skip".
