Eizo ColorEdge CG2700X, Руководство пользователя

Страница: 12 / 77

1 | Introduction
12
1.2.2 Rear
5
2
1
8 7 12
6
13
3
9 10 11
4
1. Handle This handle is used for transportation.
2. Security lock slot Complies with Kensington’s MicroSaver security system.
3. Lock button Use this button to remove the monitor from the stand.
4. USB-A connector
(downstream)
Connects to a peripheral USB device.
5. Cable holder Holds the monitor cables.
6. Stand
*1
Adjusts the height and angle (tilt and swivel) of the monitor. The
monitor can also be rotated vertically.
7. Main power switch Turns the main power on or off.
: On, : Off
8. Power connector Connects the power cord.
9. HDMI connector Connects to an external device with HDMI output.
10. DisplayPort connector Connects to an external device with DisplayPort output.
11. USB-C connector
(upstream)
Connects to an external device with USB-C output. This also
transmits the USB signal that is necessary for using software that
requires a USB connection or the Docking Station Function (see
Using the Docking Station Function [ } 68] ).
12. LAN port (RJ-45) When using the network connection of the Docking Station Function,
connect the modem or router using a LAN cable (see
Using the
Docking Station Function [ } 68] ). A USB-C connection is required
for network connection.
13. USB-B connector
(upstream)
Connect using USB cable when using software that requires a USB
connection. The blue connector.
*1
An optional arm (or optional stand) can be attached by removing the stand section.