6
6-3
Imposition settings
You can specify imposition settings using controls in the Sheet, Layout, Scale, and
Finishing panes on the left side of the main window. To view or hide a settings pane,
click the bar for that settings group.
N
OTE
:
You can change the default unit of measurement for all input fields in the
Command WorkStation Preferences dialog box. You can also specify any unit of
measurement in any field that accepts input by adding one of the following
abbreviations to the new value:
• “i,” “in,” or the inch symbol (") specifies inches, for example: 8.5 i, 8.5 in, 8.5"
• “mm” specifies millimeters, for example: 8.5 mm
• “pt” or “pts” specifies points, for example: 8.5 pts
Sheet settings
Sheet settings allow you to specify characteristics of the paper on which the job is to be
printed, such as dimensions, thickness, orientation, and whether it will be printed on
one or both sides.
Click to view or hide
the settings panel
