Edwards D397-50-000, Инструкция по эксплуатации

Страница: 30 / 76

D397-50-880 Issue C
Page 24 © Edwards Limited 2010. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Operation
4.7.7 Software module 902 - DX Profibus module Software Version
General Description
Module used in DX Profibus unit to read the software version it contains. This would normally only be
used during setup or test; as it can't alter during data exchange it would not normally be present.
Output bytes (from Master)
None.
Input bytes (to Master)
Associated Parameter options
None.
4.8 Details of TIC Software modules
This section applies only to the TIC controllers' Profibus module. The table below provides a summary of the modules
that can be configured.
Table 16 - TIC Controller Module summary
1st Release state of software in ASCII, should be 'P' for production.
e.g.
ASCII ’P’ = 50 h.
2nd Version letter of software in ASCII, normally A to Z.
e.g.
ASCII ’A’ = 41 h.
Module No. Module description Compatibility
No of output
bytes
No of input
bytes
No of
Parameter
bytes
853 DX pump set-up 75DX with a TIC controller
supporting turbo control None 1 (Dummy) 7
853 DX pump set-up 255DX with a TIC controller
supporting turbo control None 1 (Dummy) 7
859 DX pump temperature 75DX or 255DX with a TIC
controller supporting turbo
control None 2 None
860 DX pump power 75DX or 255DX with a TIC
controller supporting turbo
control None 2 None
869 DX pump speed set up 75DX or 255DX with TIC
controller supporting turbo
control 1 None 4
875 DX vent valve close 75DX or 255DX with a TIC
controller supporting turbo
control 1 None None
902 TIC Profibus module
Software Version TIC Profibus Module None 2 None
904 Turbo pump control Any TIC controller with
turbo control 1 3 15
905 Turbo pump speed Any TIC controller with
turbo control None 4 4
906 Turbo pump power Any TIC controller with
turbo control None 4 None