EDWARDS SYSTEMS TECHNOLOGY EST2, Инструкция по установке

Страница: 47 / 120

DATE: 30MAR00
Related documentation: SAN-CPU installation sheet, SAN Series Annunciator
Enclosures installation sheet
INSTALLATION SHEET:
INSTALLATION SHEET P/N: 387186
REVISION LEVEL: 2.0
FILE NAME: 387186.CDR
CREATED BY: B. Graham
APPROVED BY: J. Massing
2-SANCOM
Remote Network Control Module
SPECIFICATIONS
Warning!
Disconnect power to cabinets before installing or removing
components. Failure to do so may result in serious injury or loss of life.
!
Caution!
Observe static-sensitive material handling practices.
Front view Rear view
PRODUCT DIAGRAM
PRODUCT DESCRIPTION
The 2-SANCOM is an operator interface, which provides indicators and
controls in a SAN series package for use anywhere on the network. The
2-SANCOM requires a SAN-CPU, which is connected to it on a ribbon
cable chain along with other SAN series modules. See the drawings on
the reverse side of this installation sheet.
LED Description
Power A green LED that functions according to position of
JP3.
Alarm A red LED that flashes to indicate system alarm
conditions.
Supervisory A yellow LED that flashes to indicate supervisory
conditions.
Trouble A yellow LED that flashes to indicate system trouble
conditions.
Security A yellow LED that flashes to indicate security
conditions.
Alarm Silence A yellow LED that indicates the silencing of audible
devices.
Trouble Silence A yellow LED that indicates the silencing of the
system-wide trouble buzzer(s).
Drill/All Call A yellow LED that indicates the activation of the
drill/all call function.
Sounder Description
Buzzer Operates in conjunction with the sounder on the
control panel.
Resound
Trouble feature:
Activation of local silence in either location will silence
the buzzer until a new condition is sensed on the
system.
Indicators
Controls
Switch Description
Reset A momentary toggle switch that resets the system.
Alarm Silence A momentary toggle switch that silences audible
circuits.
Local Silence A momentary toggle switch that silences the
system-wide trouble buzzer.
Drill/All Call A momentary toggle switch that activates all
audible/visual circuits.
Lamp Test A maintained toggle switch that tests all indicators
on SAN option modules.
Enable/Disable A key switch that disables the 2-SANCOM controls.
JUMPER SETUP
Jumper Function
JP1 Zone Report Jumper
JP2 Continuity Jumper
JP3 Region Jumper
In the Enable position: Activation of the enable/ disable
keyswitch will generate a zone (xx05)
In the Disable position: Activation of the enable/ disable
keyswitch will not generate a zone.
JP2 designates the 2-SANCOM as the
last module installed in the SAN/RSAN
series modules.
In the USA position: The 2-SANCOM will light the program-
driven Power LED.
In the Europe position: The Power LED will operate in
conjunction with 24 Vdc power.
Disable Europe
Enable USA
JP1 JP3
Power
Current
Address requirements
From SAN-CPU
Stanby 22 mA
Alarm 7 mA
Trouble 15 mA
Inputs 1 (1 group of eight)
Outputs 1 (1 group of eight)
3.3 oz (93.5 g)
See the related documentation listed in
the title block for the approved enclosures.
Weight
Mounting
EDWARDS SYSTEMS TECHNOLOGY, INC.
SARASOTA, FL: 941-739-4300 FAX 941-753-1806
CHESHIRE, CT: 203-699-3000 FAX 203-699-3075
OWEN SOUND, CANADA: 519-376-2430 FAX 519-376-7258
INTERNATIONAL, CANADA: 905-270-1711 FAX 905-270-9553
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com