EDWARDS SYSTEMS TECHNOLOGY EST2, Инструкция по установке

Страница: 12 / 120

P/N: 270649 REV: 2.0 Page 2 of 2
FIELD WIRING
DB25 male (rear view)
To Form printer
+ +
(+)
(+)
(-)
(-)
24 Vdc
in
24 Vdc
in
To
next
device
To
next
device
Class A
Class B
Main
Controller
Module
TB6
RS-485
Ch 0
Ch 1
+
+
_
_
Remote Alphanumeric
Display Annunciator
(rear view)
Remote Alphanumeric
Display Annunciator
(rear view)
1 2 3 4 5 6 7 8 9 10
TB1
2 3 7
1
13
14
25
1 1
2 4
4
3 3
TB1
Terminal Function Connection
TB1-1
TB1-2
TB1-3
TB1-4
TB1-5
TB1-6
TB1-7
TB1-8
TB1-9
TB1-10
+24 Vdc
24 Vdc common
Earth ground
RS-232 RX in
RS-232 TX out
RS-232 common
RS-485 Ch 0 (+)
RS-485 Ch 0 (-)
RS-485 Ch 1 (+)
RS-485 Ch 1 (-)
+24 Vdc power supply
24 Vdc common
Local earth ground
RS-232: To RX in on printer to Data RX on PC serial port (downloading)
RS-232: To TX out on printer to Data TX on PC serial port (downloading)
RS-232 Common on printer to common on PC serial port (downloading)
To/from TB1-7 of additional 2-CMDN(-C)s/2-SMDN(-C)s
To/from TB1-8 of additional 2-CMDN(-C)s/2-SMDN(-C)s
To/from TB1-9 of additional 2-CMDN(-C)s/2-SMDN(-C)s
To/from TB1-10 of additional 2-CMDN(-C)s/2-SMDN(-C)s
TB1 connection table
Warning!
Disconnect power to cabinets before installing or removing components.
Failure to do so may result in serious injury or loss of life.
!
Caution!
Observe static-sensitive material handling practices.
Provide physical separation between two
wire bundles to ensure network survivability.
See the TB1 connection table below.
Supervised and power-limited
24 Vdc supply must have dedicated riser from
auxiliary 24 Vdc source. Power-limited if the
source is power-limited. If the source is
nonpower-limited, maintain a space of 1/4 inch
(6.4 mm) from power-limited wiring or use FPL,
FPLP, FPLR, or equivalent in accordance with
the National Electric Code.
Note
1
2
3
4
1 2 3 4 5 6 7 8 9 10
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com