P/N 3100346 ISSUE 3
PAGE 14
Figure 6. Wiring to Tone Generator Terminal Blocks
Figure 4. Wiring the 5532M Series Speaker/Amplifier
Figure 5. Wiring the 5540MV Series Tone Generator with Voice Messaging
TB1
Plastic tie-wrap (provided)--
use to separate power leads
from signal and tone initiating leads
Power and
earth-ground
leads--black and
white or black for
power; yellow
striped green for
earth-ground.
Signal/Tone leads from 5540 to be
connected to Audio Coupler Board as
applicable.
Plastic tie-wrap (provided) -
use to separate power leads
from signal and tone initiating leads
Power and
earth-ground
leads
RS485 twisted pair
Audio output wiring
to be connected to Audio
Coupler Board of 5532M. Double
wire, shielded cable with
braid or drain connected to
earth-ground lead of 5540.
Up to 2500 5532M Series can be
so connected in parallel to a
single 5540M Series unit.
(-)
(+)
Wiring is factory
installed to internal
power supply
(-)
(+)
(-)
(+)
To optional 24V DC
Battery Backup
2
4
1
3
Diode Assembly
2600010
2 4
1
3
Terminal Block
TB-1
Main
Board
+
-
Audio Output Terminals
on Tone Generator, outer
terminals (see step 3.c and 4.c)
Factory wired to speaker
in speaker/amplifiers; outer
terminals for standard volume
units, inner terminals for high
volume units