EDWANZ group Deutronic DBL-MPC4 Series, Руководство пользователя

Страница: 23 / 26

Deutronicstr. 5, D - 84166 Adlkofen, Germany
Tel.: +49 (0) 8707 920-0
Fax: +49 (0) 8707 1004
E-mail: sales@deutronic.com
http://www.deutronic.com
DBL Operating Instructions / MPC4 Last updated: 03.12.2020 Page 23 of 26
Indication
CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE
Green (permanently on) TRICKLE / BFL Supply TRICKLE / BFL --- TRICKLE / BFL Supply
Green (blink)
Yellow (permanently on)
Charge / Recharge --- Charge / Recharge Supply Charge / Recharge ---
Yellow (blink)
Red (permanently on)
Red (blink)
Off
Indication
CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE
Green (permanently on)
TRICKLE / BFL Supply TRICKLE / BFL Supply TRICKLE / BFL Supply
Green (blink)
Yellow (permanently on) Charge / Recharge
---
Charge / Recharge
---
Charge / Recharge
---
Yellow (blink)
Red (permanently on)
Red (blink)
Off
Indication
CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE
Green (permanently on)
TRICKLE / BFL Supply TRICKLE / BFL; (*)Q-/T-max- Supply
State = 2 or 4 [Uout=Tri]
Green (blink)
Yellow (permanently on) Charge / Recharge
---
Charge / Recharge ---
Yellow (blink)
Red (permanently on)
Red (blink)
Off
Indication
CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE CHARGEMODE SUPPLYMODE
Green (permanently on)
TRICKLE / BFL ---
Green (blink)
Yellow (permanently on) Charge / Recharge Supply
Yellow (blink)
Red (permanently on)
Red (blink)
Off
Load Detect active ('Contact' blink)
Load Detect active ('Contact' blink)
SIGNAL '9' (V1.41.205 and later)
Ext. OFF / Standby
Device Error (Fan, NTC etc.)
Application Error
---
Status Status
SIGNAL '2'
Status Status Status
Status
---
Load Detect active ('Contact' blink)
Device Error (Fan, NTC etc.)
SIGNAL '3' (V1.28 and later)
---
Load Detect active ('Contact' blink) / Application Error
Device Error (Fan, NTC etc.) Application Error
SIGNAL '0' SIGNAL '1'
---
Ext. OFF / Standby
---
(*) Application Error
Load Detect active ('Contact' blink) --- ---
---
Status Status Status
SIGNAL '5' (V1.30 and later)
Ext. OFF / Standby
Device Error (Fan, NTC etc.)
Ext. OFF / Standby
Ext. OFF / Standby Ext. OFF / Standby / Load Detect active ('Contact' blink) Ext. OFF / Standby / Load Detect active ('Contact' blink)
Device Error (Fan, NTC etc.) / Application Error
Device Error (Fan, NTC etc.) / (*) BAT deep discharged ---
SIGNAL '6' (V1.35 and later) SIGNAL '7' (V1.37 and later) SIGNAL '8' (V1.37 and later)
(Command Mode)
Application Error
Application Error
Device Error (Fan, NTC etc.)
--- ---
SIGNAL '4' (V1.30 and later)
--- --- ---
User defined (via Command)
Status Status Status
User defined (via Command)
--- --- Load Detect active ('Contact' blink)
User defined (via Command) Ext. OFF / Standby / Load Detect active ('Contact' blink) (*) Application Error
--- Device (Fan,NTC etc) / Application Error (e.g.Battery) Device Error (Fan, NTC etc.)
Standard / User defined (via Command) Device OFF (Mains Supply OFF) Ext. OFF / Standby
8. Signalling / LED and Signal Lamp
With the following chart you can visualize the DBL operating state by choosing between
the signal variants ”0..9”: