Getting started
ULTRA DUO PLUS 60
Order-No. 6478
Warning:
The software does not take the output current of Output 3 into account when it calculates the charge
power. This means that the charger will re-boot if the internal mains PSU is overloaded. If devices with
a relatively high current drain (more than 1 A) - such as Peltier coolers or heating covers - are
connected to the unit, we therefore recommend that you use only one of the two charge outputs, and
set the power distribution to 50% / 50%, in order to prevent overloading the internal PSU.
In this case the second output can still be used for discharging and balancing a battery.
No liability for printing errors. Modifications reserved.
PN.OF-01
