Deutronicstr. 5, D - 84166 Adlkofen, Germany
Tel.: +49 (0) 8707 920-0
Fax: +49 (0) 8707 1004
E-mail: [email protected]
http://www.deutronic.com
DBL Operating Instructions / MPC4
Last updated: 03.12.2020
Page 6 of 26
4. Commissioning
-
Before taking the charging computer into operation check the charger and the
equipment like the mains supply cord charging cable / clamps or optional accessories
(e.g. external signal lamp) on any damages.
-
For taking the charging computer into operation it has to be connected via the power
cable with a suitable mains supply (required data for the regarding device you will find
on the nameplate or the according data sheet).
-
Please check the proper fitting of the connected cables.
-
After turning on the device via the power switch the display shows the version
information for 3 seconds (see Picture 1). When showing you the information you can
choose between the following functions:
a) ‘ENTER’ button: The appearance of the application information can be extended to
30 seconds by pushing the ‘ENTER’ button for at least 3 seconds.
b) ‘UP’ button: When pressing the ‘UP’ button permanently while the version
information will be displayed the language menu will be displayed afterwards. If
necessary the ‘default’ language version can be changed.
Picture 1 – starting screen showing version information of the device
Version information e.g. name of
the device, boot loader/firmware
version
[*]
, parameter set or serial
number of the device.
[*] The text shown depends on
possible customized delivery
