Deutronicstr. 5, D - 84166 Adlkofen, Germany
Tel.: +49 (0) 8707 920-0
Fax: +49 (0) 8707 1004
E-mail: [email protected]
http://www.deutronic.com
DBL Operating Instructions / MPC4
Last updated: 03.12.2020
Page 3 of 26
1.
Installation and Safety Instructions
In addition to the operating instructions, always also comply with the specifications of the battery
manufacturer, the associated installation and safety instructions and the device-specific data sheets.
The installation and safety instructions, as well as the data sheets, can be found on our website
at
www.deutronic.com
. Alternatively, please contact Deutronic Elektronik GmbH or one of our worldwide
service centers
2. Device Information
2.1. Device description
The battery chargers of DBL-MPC4 series are designed for industrial applications,
especially for the automotive sector. They are used for charging and external power supply
operation. Due to their perfect on-board electrical system suitability, the on-board electrical
system and airbags are protected. Including extensive protection and self-protection
features like short circuit detection, revers polarity protection and a reliable sparks
suppression risks in handling are minimized. A simple menu navigation, configurable
charging parameters and built-in communication interface enable an easy and efficient
use.
2.2. Technical Data
For detailed technical data like input voltage, required mains fuse / automatic
circuit breaker to be used etc. see respective data sheet that you can get on our
webpage
www.deutronic.com
or on request from Deutronic.
2.3. Unpacking
2.3.1. Control on product completeness and transport damage
The consignment has to be inspected immediately after receipt of the goods for damages
in transit. In case of any damage please inform the carrier promptly for this case it is not
allowed to put the DBL into operation.
