Deutronicstr. 5, D - 84166 Adlkofen, Germany
Tel.: +49 (0) 8707 920-0
Fax: +49 (0) 8707 1004
E-mail: [email protected]
http://www.deutronic.com
DBL Operating Instructions / MPC4
Last updated: 03.12.2020
Page 15 of 26
5.5.5. Charge Menu / Features
Picture 7 – features in charge menu
Parameter
Description
Figures / range of adjustment
BFL (ON/OFF)
Signal ‚Battery full‘
activated /
deactivated
Note: BFL signal only takes place after
expiration of T
min
and is in addition
independent from ‘Tri’ settings.
I
bfl
in [A]
Current limit at
which BFL is
signaled
BFL signalization is indicated via LED and
connected to an external signal lamp when
the output current is below I
bfl
(see chapter 8).
ATTENTION: If BFL LOCK is deactivated the
BFL signal will be reset as soon as the output
current increases.
BFL-LOCK
(ON/OFF)
Delay time T
bfl
for
BFL-Signal
After current is below I
bfl
and the timer T
bfl
has
expired, then the BFL status signal is
permanent on (until the connected battery is
disconnected or error message displayed).
T
bfl
in [s]
Signal delay
[1 ... 60] sec
Short cell detect
(ON / OFF)
Battery test
It is checked if the battery is showing a fail on
beginning of charging process (Important:
Please follow the instructions in chapter 7
Short Cell Detection - instructions for
application).
