Deutronicstr. 5, D - 84166 Adlkofen, Germany
Tel.: +49 (0) 8707 920-0
Fax: +49 (0) 8707 1004
E-mail: [email protected]
http://www.deutronic.com
DBL Operating Instructions / MPC4
Last updated: 03.12.2020
Page 11 of 26
5.5.1. Selection of operation mode
After selecting the operation mode with ENTER field the available modes can be selected
with the arrow buttons and accepted with pressing the ENTER button:
Operation mode Description
AUTOMODE
The charger identifies automatically if a battery or a resistive load is
connected and activates due to this the respective mode.
SUPPLYMODE
It is only allowed to supply a resistive load in the SUPPLYMODE
(e.g. motor vehicle electrical system without connected batteries).
CHARGEMODE
In the CHARGEMODE it is possible to charge the battery built into a
vehicle as well as a standalone battery.
Note:
Only use the charge-mode after all parameters in the charge menu
(see chapter 5.5.4) are configured appropriately to the specifications
of the battery manufacturer.
5.5.2. Selection of language
All available languages are displayed in the LANGUAGE menu item. The language setting
can be changed by selecting the ‘LANGUAGE’ menu item and pushing ENTER with the
help of the arrow buttons it is possible to select the desired language. Afterwards confirm
the selection by pushing ‘ENTER’. Depending on the customized terms of delivery the
languages German, English, Spanish, French and Italian are available in the factory
default settings.
