EDNord QMS magicolor 2, Начало работы

Страница: 75 / 96

Macintosh
Printing
Software
5-7 Connecting to a Macintosh
Installing the QMS magicolor 2 PPD
Although the QMS magicolor 2 supports LaserWriter 6, 7, and 8, we
recommend using LaserWriter 8.
» Note: The LaserWriter driver is provided with your Macintosh system
software. All Macintosh users on a network must use the same
version of the LaserWriter and Laser Prep files to run correctly. For
example, if the network has a mixture of LaserWriter 6.x, 7.x, and/or
8.x, the printer will experience frequent reinitialization problems. To
check the version number, select the LaserWriter icon and then hold
down the Command key and press the I (letter I) key. The driver
version number appears in the Info window on the second-to-last line.
LaserWriter 7.x and 8.x do not require a Laser Prep file to work
correctly with your printer. The Laser Prep information is located
within the LaserWriter driver itself.
The QMS magicolor 2 PPD (a printer description file) is provided with
your printer so you can take advantage of special printer features
while using the LaserWriter driver.
1 If you haven’t already, install a LaserWriter driver.
Refer to your Macintosh documentation.
2 If you haven't already, follow the instructions given above in
“Installing Macintosh Utilities” on page 5-5.
3 If you don’t already have one, create a Printer Descriptions
folder on your Macintosh hard disk:
System 8 and 7 users—Create a folder called Printer Descrip-
tions inside the Extensions folder inside the System Folder.
System 6 users—Create a folder called Printer Descriptions
inside the System Folder.
4 Open the PSExec f folder you created in “Installing Macin-
tosh Utilities” on page 5-5.
5 Open the 4.x PPD’s folder.
6 Select the QMS magicolor 2 printer description file and drag
it to the Printer Descriptions folder on your Macintosh hard
disk.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500