EDNord QMS magicolor 2, Начало работы

Страница: 33 / 96

Printing a Start-
up Page
2-17 Setting Up Your Printer
Printing a Start-up Page
1 Make sure the printer is
turned off.
2 Plug the printer into a
grounded, surge-protected,
electrical outlet.
3 Turn on the printer.
Press in the power button near
the bottom left of the printer.
After a brief warm-up (typically
3 minutes) the printer produces a start-up page. More information
about start-up pages is included in the
Reference manual.
4 If the start-up page prints and the print quality is good, go on
to the next section, “Installing Options.”
» Note:
The number of sheets/faces printed statistics on the start-
up page differ from the number of sheets/faces printed statistics
in CrownView and on the consumables statistics page (Operator
Control/Consumables/Print Statistics). The numbers on the start-
up page refer to the number of sheets/faces printed during the life
of the printer. The numbers in CrownView and on the
consumables statistics page refer to the number of sheets/faces
printed to date during the current consumables tracking period
(Administration/Consumables/Start Period menu).
If the start-up page doesn’t print or the print quality is not good,
skip ahead to “Installation Troubleshooting” on page 2-18.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500