Making a
Parallel
Connection
QMS magicolor 2
Getting Started
3-4
Making the Connection
1
Turn off both the printer and the PC.
2
Connect the PC and the printer using a paral-
lel cable.
a
Connect the 25-pin end of the cable to the
PC’s parallel port, and then tighten the
screws.
b
Attach the 36-pin end of the cable to the
printer’s parallel port, and close the clips.
3
Turn on both the printer and the PC.
A start-up page should print. If it doesn’t, refer to chapter 8, “Trou-
bleshooting,” of the
Operation manual.
4
Test the communication between the printer and the PC.
You can do this by sending a file from one of your applications, or
refer to chapter 8, “Troubleshooting,” of the
Operation manual.
25-pin
Male
36-pin
Male
To Computer
To Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Содержание QMS magicolor 2
