EDNord QMS magicolor 2, Начало работы

Страница: 18 / 96

Introduction
QMS magicolor 2 Getting Started 2-2
Introduction
This chapter explains how to set up your printer for the first time. It
includes information on finding a good location for the printer, unpack-
ing and checking the shipment contents, installing consumables
(toner cartridges, OPC belt cartridge, fuser oil bottle, and cleaning
pad), loading the media cassette, turning the printer on, and printing a
start-up page.
Finding a Good Location
Location Requirements
n
With enough space to allow adequate
ventilation and easy servicing.
n
Away from cooling and heating
sources, extreme temperature
changes, direct sunlight, excessive
dust, corrosive chemicals or vapors,
water pipes, refrigerators, and any
strong electromagnetic field (such as
that created by an air conditioner),
n
Away from items that can easily burn
(such as curtains) and items that pro-
duce excessive vibration.
n
In an area with a temperature range
of 50°–90.5° F (10°–32.5° C) and rel-
ative humidity range of 20%–80%.
n
At an altitude of 0–8202' (0–2500 m).
n
On a hard, level surface capable of
supporting the 79 lb (36 kg) printer.
The printer must be placed within
1.5° of level.
Front
1
5
6
4
2
3
1 18"/45 cm
2 19.5"/50 cm
3 16"/40 cm
4 4"/10 cm
5 28"/70 cm
6 4"/10 cm
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500