EDNord QMS magicolor 2, Начало работы

Страница: 59 / 96

Configure the
Interface
4-5 Connecting to an Ethernet Network
2 You’re now ready to print.
From this point, you’ll probably perform most printing tasks from
your application. For specific information, check the printing sec-
tion in your application documentation.
For information on print media types and sizes, see chapter 2,
“Print Media,” in the
Reference manual.
OS/2 LAN Manager/LAN Server and Microsoft
Windows Network Interface Configuration
1 One unique printer name is broadcast to the network. Use
the Administration/Communications/Network2/CrownNet/
LAN Manager/Printer Name menu to enter the name of the
printer.
» Note: The name can be up to 16 characters long. Spaces and
lowercase characters are not allowed. Underscore characters
( _ ) are allowed to simulate multiword names (for example,
PRODUCT_MKTG).
2 You’re now ready to print.
From this point, you’ll probably perform most printing tasks from
your application. For specific information, check the printing sec-
tion in your application documentation.
For information on print media types and sizes, see chapter 2,
“Print Media,” in the
Reference manual.
NetWare Interface Configuration (Netware 3.x)
Unless you want to use the default settings, use the following proce-
dure to name the file and print servers. These names must be unique.
» Note: In CrownAdmin, the printer shows up as
QMS_xxxx_Print_
System_hardwareaddress
, where
xxxx
is the printer model
number and
hardwareaddress
is the printer’s hardware address as
found on the printer start-up page. This address will be blank until the
interface has been reset following installation.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500