EDNord QMS magicolor 2, Начало работы

Страница: 19 / 96

Finding a Good
Location
2-3 Setting Up Your Printer
Power Requirements
n
Your printer requires a properly grounded AC outlet with a rated
line voltage of 100 V, 120 V, or 220-240 V.
n
The line voltage must remain within ±10 percent of the rated volt-
age for proper operation of the printer.
n
The amperage capacity of the electrical outlet must be at least
1.2 times that used by the printer.
n
The maximum electrical current required during operation is 10
amps for a 100 V system, 8.3 amps for a 120 V system, and 4
amps for a 220-240 V system.
n
Noise-generating equipment should not be connected to the same
electrical outlet as the printer.
n
The recommended frequency is 50–60 Hz ±2 Hz for a 100 V sys-
tem, 60 Hz ±2 Hz for a 120 V system, and 50 Hz ±2 Hz for a
220-240 V system.
n
In a well-ventilated room.
n
Close to an easily accessible power supply. Don’t connect it to the
same electrical outlet as noise-generating equipment.
n
Near your computer—6.5' (2 m) or less for an IEEE 1284 direc-
tional parallel connection; cables for other connections may be
longer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500