EDNord QMS magicolor 2, Начало работы

Страница: 74 / 96

Macintosh
Printing
Software
QMS magicolor 2 Getting Started 5-6
7 In the dialog box that appears, verify the Install location.
To change the Install Location you can either use the drop-down
list box to display and select the appropriate disk, or you can
choose the Switch Disk button to scroll through the available disks.
8 Also in the dialog box, choose Easy Install or Custom Install.
n
Easy Install automatically installs all of the utilities, including
the PDF, PDX, and PPD files and the screen fonts.
n
Custom Install allows you to choose the options you want to
install. The amount of available space on your Macintosh
hard disk and the amount of space necessary for all of the
selected options are indicated near the bottom of the window.
» Note: If you're using Custom Install, you can click the small
icon (it looks like a capital I inside a square) to the right of
each install option for more information about that option.
9 Choose the Install button to begin.
Installation takes approximately one minute. The Installer places
all of the options inside a newly created PSExec
ƒ
folder in the
location you chose in step 7.
10 When the installation is finished, you're prompted to choose
either Continue to install additional options from the Custom
installation option or Quit to exit the Utils installer program.
Installing Macintosh Printer Drivers
To be able to use all your printer’s special features, you need to take a
few minutes to load the following software:
n
QMS magicolor 2 PPD file
See the following section, “Installing the QMS magicolor 2 PPD,”
for information.
n
Printer files for Aldus/Adobe PageMaker, Aldus/MacroMedia
FreeHand, Adobe PrePrint, Adobe Separator, or QuarkXPress
See “Application Notes” on page 5-8 for information.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500