EDNord QMS magicolor 2, Начало работы

Страница: 62 / 96

Configure the
Interface
QMS magicolor 2 Getting Started 4-8
the print server name to end the name. For example, the print
server name
FIRSTGROUP_GROUPS_BLUE_TEAM_TEAMS_CRC_QMS
is 42 characters long, and must be entered as follows:
PSERVER NAME[1]
FIRST_GROUP_GROU
PSERVER NAME[2]
PS_BLUE_TEAM_TEA
PSERVER NAME[3]
MS_CRC_QMS<space>
where <space> is the space character.
5 Reset the CrownNet interface by using the Administration/
Communications/Network2/CrownNet/Common/Soft Reset
menu.
6 You’re now ready to print.
From this point, you’ll probably perform most printing tasks from
your application. For specific information, check the printing sec-
tion in your application documentation.
For information on print media types and sizes, see chapter 2,
“Print Media,” in the
Reference manual.
NetWare Interface Configuration (Netware 4.x)
Unless you want to use the default settings, use the following proce-
dure to name the file and print servers. These names must be unique.
» Note: In CrownAdmin, the printer shows up as
QMS-xxxx-Print-
System-hardwareaddress
, where
xxxx
is the printer model
number and
hardwareaddress
is the printer’s hardware address as
found on the printer start-up page.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500