Edmunds Gages Accu-Setter II, Руководство пользователя

Страница: 106 / 119

4-21
Printer Offloading
The operator must initiate printing for the print protocol. This is performed by pressing
the enter key twice while the Accu-Setter is in the RUN mode. The print format can
contain from three to five fields for each feature being measured. The following five
fields are allocated for each measures feature:
Field 1 — Check Name, 8 ASCII Characters
Field 2 — Check Value, 5 - 8 ASCII Characters (+0.12345)
Field 3 — Scale, 2 ASCII Characters (in. or mm)
Field 4 — Check Status, 0 - 7 ASCII Characters
Field 5 — Check Class, 0 - 8 ASCII Characters
The print data can vary in length depending on the number of features programmed in the
Accu- Setter. The Accu-Setter will communicate to any generic serial printer by
transmitting an “ACSII” data string.
Print Format:
•
at the top of each new page:
EDMUNDS GAGES <cr><lf>
ACCU-SETTER II<cr><lf>
•
for each initiated PRINT:
<cr><lf>
<check 1 name> <check value> mm GOOD CLASS 01 <cr><lf>
<check 2 name> <check value> mm +APPRCH
<cr><lf>
<check 3 name> <check value> mm
CLASS 79 <cr><lf>