Eco ETS 64-R, Монтаж и эксплуатация

Страница: 77 / 112

ETS 64-R
0548-990-61---70g_2019.10.indd
0548-990/62g
Page 77 of 95
Mounting and operating instructions
9.1.6 Options
9.1.5 System
9.1.7 Closing sequence / Interlock function
No. Description Cause Elimination Checking time Reaction
E50 01...99 System error Unexpected hard -
ware or software
event.
Switch the drive mechanism off/on.
Carry out a Factory Reset, carry out a Software Update,
inform the manufacturer.
Permanent. W or H or F
E51 01...99
E52 01...99
No. Description Cause Elimination Checking time Reaction
E60 00 Relay PCB 0 Option PCB has been remo -
ved, its address changed or
become defective.
Check if the option is provided.
If defective: Replace or remove from the configu -
ration.
Note:
Deleting of error 60  see chapter 13.6.1.
Permanent. W
10 Relay PCB 1 Permanent. W
20 Relay PCB Permanent. W
30 Fire-protection PCB Permanent. A
No. Description Cause Elimination Checking time Reaction
E70 xx CAN bus setting CAN address xx existing
twice.
Correctly define the role of the closing sequence or the
interlock function.
Permanent. W
E71 01 CAN connection No CAN connection. Plug in, check or replace the CAN cable.
Check if all the CAN participants are switched on.
Permanent. W