Eco ETS 64-R, Монтаж и эксплуатация

Страница: 8 / 112

ETS 64-R
0548-990-61---70g_2019.10.indd
0548-990/62g
Page 8 of 95
Mounting and operating instructions
• In order not to create any dangerous squeezing and shearing points, no structural modification
must be made within the door surroundings, without prior authorization from ECO Schulte
GmbH & Co. KG. Furthermore, it is important that no objects (such as furniture, pallets, etc.) be
placed in the vicinity of the door.
• The door leaves and their fillings must be manufactured according to the applicable standards
(e.g. EN 16005). For the door leaf fillings, brake-proof material respectively safety glass shall be
used. Transparents door leaves (or their surfaces) must be clearly recognizable, e.g. by means
of a permanent marking or dyed materials.
• The application limits must be observed.
• The choice of fastening elements depends on the construction base.
• It is imperative for the customer to install a door leaf stop piece! The latter limits the opening
motion of the door leaf and prevents it's being damaged in the manual operating mode. As an
option, an open position stop piece can be integrated into the drive mechanism itself.
• Door sills or other protruding elements of the door system are to be identified by warning
stickers or another appropriate marking means.
• In its assembled state, the installation must answer all the safety requirements specified by the
machinery directive.
• The swing door drive mechanism with fire protection rating ETS 64-R may only be installed and
operated in dry rooms. If this condition cannot be fulfilled, the customer must provide sufficient
protection from moisture.
• The swing door drive mechanism with fire protection rating ETS 64-R must not be mounted
within locations presenting explosion hazards. The presence of flammable gases or smoke
represents a considerable safety hazard.
• All further interventions on and modifications of the installation that are not described in the
present instructions are forbidden!
• Wrapping materials (such as plastic foil, polystyrene foam, strings, ....) represent a source of
danger for children and must therefore be kept out of reach of the latter.
• The installation has been calculated, designed and manufactured on the basis of the latest
state-of-the-art technology and the generally recognized safety-relevant rules and regulations.
It may only be operated if it is in perfect condition, taking into account the specifications of the
present instructions. Any use beyond the defined application limits is inadmissible!
• The installation is to be operated and maintained in such condition that the safety is guaran -
teed at all times. An integral part of this condition is the appropriate use, the compliance with
the operating conditions prescribed by the manufacturer, as well as the regular service (mainte -
nance/checking).
• The installation’s conformity with the machinery directive must be confirmed.