Eco ETS 64-R, Монтаж и эксплуатация

Страница: 32 / 112

ETS 64-R
0548-990-61---70g_2019.10.indd
E
C
B A
F
90°
D B
D
320
592
22 29
27
43,5
74,5
36,5
A
B
!
0548-990/62g
Page 32 of 95
Mounting and operating instructions
Attention:
Check the motional sequence of the door leaf: The rods must not touch. If the rod
arm (B) juts out too much, it can be shortened if necessary.
Drive mechanism standard
5. Close the door leaf.
6. Separate the rotating arm (D) from the rod arm (B) by
dismounting the ball and socket joint (E).
7. Fasten the rod arm (B) by means of the door connec -
tion angle (A) onto the door leaf.
8. Position the rotating arm (D) including the clamping
piece (C) perpendicularly with regard to the door leaf
and screw the rotating arm (D) down in this position.
9. Slightly loosen the screw (F) of the rod arm (B) and
snap in the ball and socket joint (E) which connects
the rotating arm (D) with the rod arm (B).
10. Prestress the rotating arm (D) until the rod arm (B)
forms a right angle with the door leaf. Fasten the rod
arm (B) by means of the screw (F).
11. Tighten all the screws.
12. Mount the open position stop piece approx. 5° before
the door leaf reaches the maximum open position.
If existing:
Setting of the open-position stop piece, integrated in
the drive mechanism (see Option instructions 0548-
992/02).

forward to chapter 4.6
Inverse application
5. Separate the rotating arm (D) from the rod arm (B) by
dismounting the ball and socket joint (E).
6. Fasten the rod arm (B) by means of the door connec -
tion angle (A) onto the door leaf.
7. Completely open the door leaf (max. 110°).
8. Position the rotating arm (D) including the clamping
piece (C) perpendicularly with regard to the door
lintel (direction open position) and screw the rotating
arm (D) down in this position.
9. Slightly loosen the screw (F) of the rod arm (B) and
snap in the ball and socket joint (E) which connects
the rotating arm (D) with the rod arm (B).
10. Close the door leaf.
11. Position the rod arm (B) perpendicularly with regard
to the door leaf. Fasten the rod arm (B) by means of
the screw (F).
12. Tighten all the screws.
 back to page 24