Regular Fixing
Transom Fixing
90°
1
2
3
Using the templates provided, mark and
drill pilot holes into the door and frame.
Using the templates provided, fix the mechanism to the door
as well as the armset and any necessary brackets.
Attach the armset to the mechanism
ensuring the pre-loading requirement
has been completed.
90°
1
2
3
Using the templates provided, mark and
drill pilot holes into the door and frame.
Using the templates provided, fix the mechanism to the door
as well as the armset and any necessary brackets.
Attach the armset to the mechanism
ensuring the pre-loading requirement
has been completed.
Installation Instructions: Please refer to actual size template for exact fitting dimensions
Pre-Loading of Arm
For the unit to provide the optimum performance and overcome
any resistance upon closing it is recommended that the armset
is “pre-loaded” To pre-load, reposition the fixing angle of the
arm onto the mechanism so that the end of the closing cycle
would be past the stop position, as indicated below.
Adjustment Details
This unit is a power adjustable mechanism. Power / force adjustment is carried out by a single
adjustment valve in the end of the mechanism. The unit is pre-set in the factory at EN size 3.
Please see table below for adjustment details for each power size.
Instructions for adjusting this product are detailed overleaf.
Before
After
90°
90°
Fixing in Fig.1 / Fig.61
3
Max.
Door width
Max.
Door weight
950mm
60Kg
Power
size
180°
165°
Door opening
Max.
4
1100mm
80Kg
0
4CW
Number of turns
Factory preset
CW:Clockwise CCW:Counterclockwise
No.1
180°
750mm
20Kg
7CCW
2
180°
850mm
40Kg
4CCW
Fixing Instructions for :
S500 Series
Door Closer
Power Adjustable EN 2-4
APPROVED
PRODUCT
CF5294
CPR
AD5194
1121
15
BS EN1154:1997+ A1:2002
3 8 42 1 1 4
ISSUE 02:11/17
10611 ZINS-X981-3S
www.synergyhardware.co.uk
www.synergyhardware.co.uk
