ECKELMANN VS 300, Руководство по эксплуатации

Страница: 73 / 172

Startup of VS 300
65 Doku-Version 2.05 - Firmware 2.10 - 15. September 2017
2. Pressing the
↵
key moves to parameter list selection and Parameter List A is displayed (see illustration).
E S C
RE S ET
1 2 3 4
1 2
5 6 8
9 1 0 11 12
7
S tatus
1 2
O FF
Z
N
R
.
51203
50
4
30
/ /
O FF
The
↑
and
↓
keys can be used to select the following parameter lists:
A Actual Values System Data
S1 Setpoints Controller Basic Parameters
S2 Setpoints Controller Auxiliary Parameters
S3 Setpoints System Configuration
S4 Setpoints Alarm Priorities
S5 Setpoints Additional parameters
t Setpoints Timers
C Service Mode (Check Mode)
F Alarms Process and System Fault Reports
3. Pressing the
↵
key again opens Parameter List A ( A000 is shown on display). Use the
↑
and
↓
keys to se­
lect Parameter A060 (see illustration).
E S C
RE S ET
1 2 3 4
1 2
5 6 8
9 1 0 11 12
7
S tatus
1 2
O FF
Z
N
R
.
51203
50
530
/ /
O FF
4. Pressing the
↵
key again moves to entry or parameter setting mode. The display shows 0 flashing. Press
the
↑
key to select Parameter 10 for Superuser Mode access level:
0 = Display only
1 = Setpoint adjustment enabled
10 = Superuser mode – additional parameters can be accessed and changed
Pressing the
↵
key confirms the entry and moves back to Parameter List A ( A060 is shown on display).