960E
Installation Manual
ECI Telecom Ltd. Proprietary
iv
The laser equipment complies with laser product performance standards set by
government agencies for Class 1 laser products per IEC 60825-1. The product and its
accessories do not emit hazardous light and the beam is totally enclosed during all
operating modes of customer operation and maintenance.
Warning Instructions
•
Never assume laser power is turned off or that the fiber is disconnected at the other
end.
•
Place a protective cap over any radiating optical fiber connector.
•
Avoid direct eye exposure.
Electrostatic Discharge (ESD) Precautions
This section provides guidelines regarding the protection of SFP pluggable cards against
electrostatic damage during handling, packing/unpacking, transport, installation,
commissioning, inspections, servicing and maintenance work. The following arrangements
must be observed by persons entering and/or performing fieldwork:
•
Use an ESD wrist strap connected to the ground terminal at the front side of the 960E
when handling SFPs. Failure to do so may result in electrostatic discharge (ESD)
damage to electronic components.
•
SFP should be placed directly into protective packaging upon removal from
equipment. A replacement SFP shall be kept in its protective packing until required for
immediate installation into equipment.
•
The field service operator should insure that the materials and tools necessary to
maintain and control the temporary ESD Protected Area (EPA) are available at the
place of the field work during service time.
Symbols Used in this Manual
The following symbols are used in this manual:
Â
Indicates information which ensures ease of installation.
Warning
: Indicates information on how to avoid personal injury.
Laser Warning
: Indicates information on how to avoid personal injury. All
personnel involved in equipment installation, operation, and maintenance must be aware
that laser radiation is invisible. Therefore, although protective devices generally prevent
direct exposure to the beam, personnel must strictly observe the applicable safety
precautions and, in particular, must avoid staring into optical connectors, either directly or
using optical instruments.
Caution
: Indicates information on how to avoid damage to the equipment or to
avoid possible service disruption.
ESD
: Indicates information on how to avoid discharge of static electricity and
subsequent damage to the unit.
