MAINTENANCE
4.1.
SERVICE KIT - COMPONENT REPLACEMENT
STEP 1 – USED OIL
Open the Power Unit and unscrew the oil cap with a water pump pliers.
Use a suitable suction pump for removing some of the used oil by suction.
Wait 3 to 5 minutes and then remove the remaining used oil.
Used engine oil must be disposed in accordance with the applicable coun-
try regulations. Improper disposal of used oil represents a hazard to the
environment! Mixing foreign substances such as solvents, brake fluid,
coolant and chlorinated oil in used oil is strictly prohibited!
STEP 2 – VALVE CLEARANCE ADJUSTMENT
Remove the oil separator hose from the valve cover.
Remove the old spark plugs by a torque wrench with a
16 mm
spark plug
insert.
Loosen the 2 bolts on the valve cover by a
10 mm
socket spanner and re-
move the valve cover.
Fig. 4.02
Fig. 4.03
Fig. 4.04
Fig. 4.05
Fig. 4.06
9
