MAINTENANCE
Put the air filter box and the oil separator hose back into their positions and
fix the air filter box bolts by a
10 mm
open-end spanner.
Put the MGB hose back into the intake sockets and use the 2 spring hose
clamps to fix it by a hose clamp pliers.
Push the zero pressure hose onto the new vacuum sensor and fasten the
vacuum sensor by a
5 mm
Allen screwdriver.
Put the plug back onto the vacuum sensor and the zero pressure hose back
onto the air filter box.
STEP 6 – OIL FILTER
Dismantle the used oil filter by an oil filter spanner.
Used filters must be disposed in accordance with the applicable country
regulations. Improper disposal of used filters represents a hazard to the
environment!
Take the new oil filter, put a little oil onto the rubber seal and tighten the oil
filter manually.
Do not use any tools to fit the oil filter as they could damage it!
STEP 7 – PLUG FOR MEASURING POINT
Depending on the type of exhaust gas pipe, consider replacing the plug in
the exhaust gas opening on the exhaust gas pipe upstream of the Power
Unit.
STEP 8 – NEW SPARK PLUGS
The temperatures of the spark plugs and the cylinder head have now equalised.
Fasten the new spark plugs by a torque wrench with a
16 mm
spark plug
insert and put the spark plug cap back on.
Torque:
18 Nm
.
Fig. 4.31
Fig. 4.32
Fig. 4.33
Fig. 4.34
Fig. 4.25
Fig. 4.26
Fig. 4.27
Fig. 4.28
Fig. 4.29
Fig. 4.30
12