With End Sweeps, the INNI is 73-3/8” long. If your shower isn’t this exact size, cut the
Drain Body to fit your shower. If a longer length is needed, the Drain Coupler kit can be
used to join two INNI’s. (See pg. 19 for information on the Drain Coupler kit).
For more information visit ebbe-america.com
Mark the Final Drain Body Cut
:
•
Put the Drain Body in the desired location
•
Place the left and right End Sweeps against
the left and right walls respectively.
•
Use a square and pen to mark the Drain
Body at the End Sweep drop down location
as shown. The Drain Body is now ready for
the final cut.
Dry Fit the Drain:
After cutting, de-burr parts, dry-fit the
Drain Body and End Sweeps together and
verify the assembly fits the space. Adjust
as needed.
a
Rough Cut the Drain Body:
Measuring from the center of the waste pipe, cut the Drain Body within 4” of each wall so it fits
into the space and connects to the waste pipe. Don’t worry the Drain Body is cut short of the
walls; the End Sweeps will make up the remaining distance.
b
d
4” MAX
c
Final Cut of the Drain Body:
Cuts can be made with a variety of tools,
however, make sure cuts made to the
Drain Body are
NEAT and SQUARE.
CUTTING THE INNI TO SIZE
6
